Miranda UAP-1783 Operations Instructions download pdf (Page 32)

GUIDE TO INSTALLATION AND OPERATION

28 | UAP-1783

3.3.12 Options

Two options are available for the UAP-1783:

• UP/DOWN MIXING option (UAP-1783-OPT-MIX)

• DYNAMIC PROCESSING option (UAP-1783-

OPT-DYN)

Activate either option on the UAP-1783 card by entering

the activation key into the Enter Key data box in its tab,

and clicking the Enable Option button.

• The current status of the option is shown in the

status box below the Enter Key data box.

See the text message at the top of the tab for

information about purchasing an option and obtaining

the activation key.

3.3.13 Alarm Configuration

Selecting the Alarm config tab opens a separate

window for error status reporting. The alarm

Configuration Panel shows all measured

parameters and offers the following options for

each:

Choose an alarm Name, use the pull-down box

in the Overall alarm column to select the level

associated with this alarm: Disabled, Minor,

Major or Critical.

Check Log events to enable logging. The result

is stored in a database managed with GSM in

iControl Navigator.

In the bottom of the column Status/Name, the

Card LED color follows the status of the

physical card LED, as defined in the front panel

menu Configure Alarm (page 9).

The overall Status is reflected by the color of

the indicator attached to the card in iControl

Navigator. It is also displayed in the upper left

corner of the iControl Interface of the UAP-

1783.

GSM is a dynamic register of all the system

alarms, and is also an alarm provider for

external applications.

1 2 ... 27 28 29 30 31 32 33 34 35

No comments

Miranda UAP-1783 Operations Instructions Page 32