Miranda UAP-1783 Operations Instructions Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
GUIDE TO INSTALLATION AND OPERATION
12 | UAP-1783
3.3.1 Audio Processing
3.3.1.1 Audio Processing - CH 1-4 to CH 13-16 tabs
The channels 1 to 4 are the analog inputs, channels
5 to 8 are the digital inputs. When a video card is
present, 8 extracted audio channels are available
as Channel 9 to Channel 16, see ABUS Input
Section (page 24).
Each of these tabs controls the input processing:
Levels, Fixed Delays and configuration for the
absence signal detection for two pairs of channels;
each channel is provided with a set of controls.
Levels sub-tab: grouped by pair of channels, each
channel has the following controls: a Level slider
(from -96 to 12 dB), an input box where the desired
level may be input directly, a Mute icon button and a
Phase Invert checkbox.
At the bottom are three checkboxes:
Swap – allows channel swapping inside a
pair.
Lock – locks both channel sliders together for
levels and delay, so that moving one slider
moves the other one as well.
Test – replaces the input signal with a stereo
test tone.
Fixed Delay sub-tab: adds an audio delay to the
signal. For each channel, two sliders allow delay to
be adjusted.
Coarse – adjusts the delay in ms, from -100
ms to 2400 ms
Fine – adjusts the delay in sample
increments, from -47 to 47.
Input data boxes are available to enter numerical
values directly.
The displayed value gives the delay between a card
input and a digital output.
The negative values will be applied only when
the UAP-1783 is slave of a video card via
ABUS.
The positive small values desired have to be
larger than the minimum processing delay to
be effective.
For the digital inputs, if only one channel is non-
PCM, the input sample rate converter is bypassed
for both channels together, the audio channel will
pass with its original sample rate, and possibly not
synchronized to the reference.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

Comments to this Manuals

No comments