Miranda UAP-1783 Operations Instructions

DENSITÉ series UAP-1783 Eight Channel Universal Audio Processor Guide to Installation and Operation M768-8900-100 15 May

GUIDE TO INSTALLATION AND OPERATION 6 | UAP-1783 3.2.1 Status LED The status monitor LED is located on the front card-edge of the UAP-1783, and is

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 7 3.2.2 Menu for local control The UAP-1783 has operating parameters which may be adjusted locally

GUIDE TO INSTALLATION AND OPERATION 8 | UAP-1783 OFF, UPMIX, DOWNMIXAUTO, MANUALCUT, -6, -4.5, -3, -1.5, 0, +1.5, +3.0, +4.5, +6 dBOPERATION MODECU

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 9 CONFIGURE ALARMSYELLOW, RED, FLASH RED (default depends on alarm)NONE, GPIALARM LEVELALARM REPORT

GUIDE TO INSTALLATION AND OPERATION 10 | UAP-1783 3.3 Remote control using iControl The operation of the UAP-1783 may be controlled using Miranda

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 11 Status Icons At the top, to the left of the Miranda logo, are ten status icons that report vario

GUIDE TO INSTALLATION AND OPERATION 12 | UAP-1783 3.3.1 Audio Processing 3.3.1.1 Audio Processing - CH 1-4 to CH 13-16 tabs The channels 1 to 4 ar

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 13 Config sub-tab: this tab sets the card’s behaviour in the event of a loss or absence of audio sig

GUIDE TO INSTALLATION AND OPERATION 14 | UAP-1783 3.3.2 Dynamic Processing This process is part of the input processor, refer to the block diagram

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 15 3.3.2.2 CH 9 to CH 16 tabs: The functions are same as above but for the channels 9 to 16.

GUIDE TO INSTALLATION AND OPERATION UAP-1783 Safety Compliance Information Safety Compliance This equipment complies with: - CSA C22.2 No. 60950

GUIDE TO INSTALLATION AND OPERATION 16 | UAP-1783 3.3.3 Audio Output 3.3.3.1 Audio Output - CH 1-2 to CH 7-8 tabs: Each of these tabs controls t

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 17 Mix (see CH 3 in the figure on the right) Two sources are selected using the Source A and Source

GUIDE TO INSTALLATION AND OPERATION 18 | UAP-1783 3.3.3.2 Audio Output - Config tab: The Output 0 dBFS pulldown box sets the analog output conver

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 19 3.3.4.2 UP/DOWN-MIX – UP-MIX tab: This feature is used to create, from a stereo source, a multi-

GUIDE TO INSTALLATION AND OPERATION 20 | UAP-1783 is present, down-mix levels default to those currently set by the user in the L/R, Center, Surrou

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 21 3.3.5 Channel Status 3.3.5.1 Channel Status - Status tab: This tab displays the most relevan

GUIDE TO INSTALLATION AND OPERATION 22 | UAP-1783 3.3.6 Audio Type This Window indicates the audio type of each channel at the input of the card, a

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 23 3.3.7 RALM tab: This Remote Audio Level Meters feature allows distant supervision of the audio le

GUIDE TO INSTALLATION AND OPERATION 24 | UAP-1783 Color samples – the three samples show the currently-selected color for the upper, middle and low

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 25 3.3.9 Reference Input Reference – Desired: Use a radio button to select a reference signal for

GUIDE TO INSTALLATION AND OPERATION UAP-1783 Table of Contents 1 UAP-1783 Eight Channel Universal Audio Processor...

GUIDE TO INSTALLATION AND OPERATION 26 | UAP-1783 3.3.10 Rear Type This tab shows the type of the rear panel: single or dual width, and digital inp

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 27 3.3.11.1 Profiles Click the Profiles button at the bottom of the Factory/Presets panel to open a

GUIDE TO INSTALLATION AND OPERATION 28 | UAP-1783 3.3.12 Options Two options are available for the UAP-1783: • UP/DOWN MIXING option (UAP-1783-O

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 29 3.3.14 Info The Info panel provides the user information about the UAP-1783. The boxes titled La

GUIDE TO INSTALLATION AND OPERATION 30 | UAP-1783 4 Specifications Analog Inputs (4) Signal analog audio Input impedance > 10 kΩ Maximum leve

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 31 Digital to Analog Output 0 dBFS 0 to +24 dBu (1 dB steps) Freq. response ± 0.1 dB (20 Hz to 20

GUIDE TO INSTALLATION AND OPERATION UAP-1783

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 1 1 UAP-1783 Eight Channel Universal Audio Processor 1.1 Introduction The UAP-1783 is an eight-ch

GUIDE TO INSTALLATION AND OPERATION 2 | UAP-1783 • Overload detection • All settings through frame control panel or remotely • Status LED and ala

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 3 2 Installation 2.1 Unpacking Make sure you have ordered and received the UAP-1783 and its associ

GUIDE TO INSTALLATION AND OPERATION 4 | UAP-1783 Dual rear panels AES3 or AES3-id compatible UAP-1783-AADD110-DRPANALOG OUT+ G - + G -+

GUIDE TO INSTALLATION AND OPERATION UAP-1783 | 5 3 Operation 3.1 Control options The UAP-1783 has two primary control interfaces: • The local c