Miranda UAP-1783 Operations Instructions download pdf (Page 10)

GUIDE TO INSTALLATION AND OPERATION

6 | UAP-1783

3.2.1 Status LED

The status monitor LED is located on the front card-edge of the UAP-1783, and is visible through the front

access door of the DENSITÉ frame. This multi-color LED indicates module status by color, and by

flashing/steady illumination, according to the chart. The chart also indicates fault reporting for this card on the

DENSITÉ frame’s serial and GPI interfaces.

Serial

Report

GPI

Report Green Yellow Red

Flashing

Red

Flashing

Yellow

Card system error



Not expected reference Error



Reference error



AES carrier no lock



AES carrier biphase



AES carrier parity



AES carrier CRCC



AES carrier invalid sample



AES PCM presence



AES Non-PCM presence



AES Dolby E presence



AES AC-3 presence



NSD CH 1 to 4 Analog input



NSD CH 5 to 8 Digital input



NSD CH 9 to 16 (Ext.CH 1/8 or 9/16)



OVERLOAD CH 1 to 4 analog inputs



OVERLOAD CH 1 to 16 processing



OVERLOAD analog outputs 1 to 4



OVERLOAD digital outputs 5 to 8



Any TONE activated



Any output Mute



User attention - - - - - - Yes

Rear panel error - - - - - Yes -

FPGA error - - - - - Yes

 : Factory default.

Note: The non-requested message posting to an alarm status can only be accessed by the

communication protocol (serial port)

NOTE: A “Flashing Yellow” Status LED indicates that the SELECT button on the front panel has been

pushed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Comments to this Manuals

No comments

Miranda UAP-1783 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Audio cards Miranda UAP-1783