Miranda UAP-1783 Operations Instructions Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
GUIDE TO INSTALLATION AND OPERATION
16 | UAP-1783
3.3.3 Audio Output
3.3.3.1 Audio Output - CH 1-2 to CH 7-8 tabs:
Each of these tabs controls the output processing for two output channels – source selectors, level controls
and mixers for each output.
A coloured box indicates the audio type for each output of the card.
Detected audio types can be PCM, AC3 (Dolby Digital), Dolby E or N-PCM (other non-PCM).
The Operation Mode pulldown establishes the configuration of the controls for an output channel. There are
four options:
A (see CH 1 in the figure on the right)
The source is selected using the Source A
ABUS Select and Channel pulldowns, and its
level is adjusted using the slider or data box.
The ABUS select options are:
o V select one of the 16 channels from
the video card.
o A1 select one of the 16 channels from
an audio card. A1 is always Local,
Slave 1 or Master
o A2 select one of the 16 channels from
an audio card. A2 is always Slave2
or Slave.
The output Level is adjustable from -96 to
+12 dB with the slider or a direct keyboard
entry.
SUM (A+B) (see CH 2 in the figure on the right)
Two sources are selected using the Source A
and Source B ABUS Select and Channel
pulldowns. The two sources are added, and the
level of the combined signal is attenuated by
the amount selected in the Sum (A+B) LEVEL
pulldown.
The ABUS select options are:
o V select one of the 16 channels from the video card.
o A1 select one of the 16 channels from an audio card. A1 is always Local, Slave 1 or Master
o A2 select one of the 16 channels from an audio card. A2 is always Slave2 or Slave.
The Sum (A+B) Level pulldown offers attenuations of 0 dB, -3 dB and -6 dB.
NOTE: If you attempt to mix two different audio types to an output, only the Source A signal will be
routed to this output and the Source A audio type will be displayed. The Source B signal will be
ignored.
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Comments to this Manuals

No comments