Miranda Kaleido-X16 Installation Manual download pdf (Page 55)

Kaleido-X16

Hardware Description & Installation Manual

ABT-128A rear panel layout

ABT-64A rear panel layout

Connections

Audio Inputs

The number and configuration of the audio inputs depends on the specific model of ABT you are using.

Reference Input (Looped Through)

An external reference signal is required to synchronize the SDTI outputs. An analog video reference signal,

word clock or AES-75 signal can be connected to one of the REFERENCE SIGNAL connectors. If the loop-

through is not used, a 75 ohm termination on the other REFERENCE SIGNAL connector must be used to

properly terminate the line.

For an Audio Bridge Terminal with an AES breakout panel, AES INPUT 1 can also be used for

synchronization. This input signal must be error-free PCM audio sampled at 48 kHz. In the case where both

REFERENCE SIGNAL and AES INPUT 1 have valid references, the signal connected to REFERENCE SIGNAL has

priority.

Multiplexed Audio Outputs

The multiplexed audio outputs are formatted to be compatible with the STDI audio input connections on

the KXI-16 series of cards.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 81 82

No comments

Miranda Kaleido-X16 Installation Manual Page 55