Miranda Kaleido-X16 Installation Manual download pdf (Page 52)

Peripheral Equipment

Resetting the Kaleido-RCP2

• The PANEL ENABLE LED is flashing.

• All other keys on the Kaleido-RCP2 are disabled (LEDs off).

• The LCD display is off.

• Any peripherals (e.g. mouse, keyboard) connected to the Kaleido-RCP2's USB ports are also disabled.

The purpose of the panel enable function is to lock the user interface of the remote, thus avoiding any

accidental access to the Kaleido system.

Resetting the Kaleido-RCP2

You can reset the Kaleido-RCP2 in either of three way:.

Audio Bridge Terminal

Introduction

The optional Audio Bridge Terminal (ABT) is an external audio multiplexer/serializer for the Kaleido-X16.

The Kaleido-X16 supports audio channel inputs from either a 64- or 128-ABT panel through a single SDTI

input. The 64-ABT supports 64 channels and the 128-ABT supports 128 channels. The SDTI is a

BNC connection located on the rear connector panel of the frame.

There is not enough space on the Kaleido-X16 rear panel to also include discrete audio connectors. An ABT

provides connector space for multiple audio signal inputs, and multiplexes all the audio signals into a

combined serial feed on a coaxial cable that connects to the rear connector panel.

Features include:

• 128 channels of audio processing

• Analog or digital audio inputs

• Dual redundant SDTI outputs on standard video coaxial cable

• Internal tone generator

• 0 dBFS adjustments on analog inputs

Press ENTER + ESC + DEL.

simultaneously

High level software reset that restarts the device and does

nothing else.

Software and hardware watch-dogs. Automatic reset the device on software or hardware failure of

the internal controller

Disconnect and reconnect the

Kaleido-RCP2's Ethernet cable.

Power up the remote and do nothing else.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 81 82

No comments

Miranda Kaleido-X16 Installation Manual Page 52