Miranda Kaleido-K2 User Manual download pdf (Page 27)

Configuring the RCP2

The optional Kaleido-RCP2 is a multi-function remote control panel designed for use with Miranda’s

Kaleido-X. Ethernet connectivity allows multiple RCP2 users to access multiple Kaleido-X systems,

allowing convenient access to the real-time operating features of the Kaleido-X. When logged into a

Kaleido-X via its ethernet connection, it can control various operating features of the Kaleido-X.

Note: The Kaleido-RCP2 is powered through the RJ-45 ethernet connector. There is no power ON/OFF

button, so the device is ON when a powered ethernet cable is connected.

Before you can use the RCP2 to operate your Kaleido-X, you must set up the ethernet connection between

the two devices. By default, the Kaleido-RCP2 is shipped with DHCP enabled, so it will automatically be

assigned an IP address by a DHCP server. If no DHCP server is present on the network, the Kaleido-RCP2 will

default to its static IP address (10.0.3.191).

Note: The time-out period before the RCP2 defaults to its static address is “3” minutes. To speed up the

initialization, disable the DHCP option.

To configure the IP address of the RCP2, do the following:

1. Press and hold the ENTER key on the RCP2 for “8” seconds to display the Configuration menu.

2. Press the “8” key (to move down the list) until ETHERNET OPTIONS appears on the RCP2 LCD display.

3. Press ENTER key to display the ETHERNET OPTIONS menu.

4. Select the IP ADDRESS menu using the “2” key (to move up in the list) and/or the “8” key (to move

down the list), then press ENTER.

5. Using the numeric keypad, type the chosen IP address, then press ENTER.

Kaleido-X User's Manual.book Page 13 Friday, August 24, 2007 4:39 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 193 194

No comments

Miranda Kaleido-K2 User Manual Page 27