Miranda SPG-1801 Instruction Manual download pdf (Page 7)

GUIDE TO INSTALLATION AND OPERATION

SPG-1801 | 3

2 Installation

2.1 Unpacking

The following items should be included in the SPG-1801 package:

• For Densité 2:

 SPG-1801 HD / SD Frame Reference Module

 SPG-1801-SRP rear panel

• For Densité 3:

 SPG-1801-3RU HD / SD Frame Reference Module

 SPG-1801-SRP-3RU rear panel

• User manual

2.2 Installation in the Densité frame

The SPG-1801 must be mounted in a Densité 2 or Densité 3 frame. The installation includes both the SPG-1801

module, and the rear panel module. It is not necessary to switch off the frame’s power when installing or removing

the card.

Detailed instructions for installing cards and their associated rear panels in the Densité frame are given in the

Densité Frame manual.

2.3 Connection

All connections are made on the rear panel:

• Connect the input reference signal to the BNC marked REF IN

A loop-through is provided, which should be terminated if unused.

• Connect LTC time-code to the BNC marked LTC IN

• Two programmable sync outputs are available on the SYNC OUT BNC connectors

Figure 2.1 SPG-1801-SRP rear panel

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Miranda SPG-1801 Instruction Manual Page 7