Miranda HMP-1801 Instruction Manual download pdf (Page 44)

GUIDE TO INSTALLATION AND OPERATION

40 | HMP-1801

4 Web Control Panel

The HMP-1801 is provided with a dedicated ethernet port on its rear panel, in order that it may communicate with

outside systems independently of the Densité frame controller and independently of the iControl system.

In addition, the card includes an on-board FTP server. These elements allow the creation and management of clips

from a remote computer.

When the remote computer connects to the HMP-1801 card by typing its IP address into a web browser, the on-board

web server sends a page giving access to two resources:

1. The Ingest and Configuration Utility (see Section 4.1)

2. The Firmware Upgrade (see Section 4.2)

Click on the link to access the desired resource.

Figure 4.1 Onboard Web Server Home Page

4.1 Ingest and Configuration Utility

The Ingest and Configuration Utility of the HMP-1801 can be accessed via either of two methods:

• Navigate to the HMP-1801’s rear panel ethernet port’s IP address using a browser, and click on the “Start the

Configuration Utility….” link in the onboard webserver’s home page (see Figure 4.1)

• Click on the Media Manager… button in the HMP-1801’s iControl panel and then click the Load Media

Management Utility button in the panel (see Section 3.4.6)

In both cases, the Ingest and Configuration Utility window will open. Using this window, your can import, export, and

record video essences to the HMP-1801, and configure clips using those essences. You can also trip or crop the

video essences as required.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 76 77

No comments

Miranda HMP-1801 Instruction Manual Page 44